Wall Sensor Plate & Spout

Sensor Plate and Spout

#ET2-20.5DC (battery only)
#ET2-20.5AC/DC (mains with battery back-up)

The sensor is wall mounted and is activated by standing in front of the sensor plate. A 1-2 second time delay and specially set activation zones will eliminate false activation by passing traffic. It a very practical option for all areas where hygiene is the priority.

Placement of the sensor, allows for this tap to be considered for installation in all areas where stainless steel basins or troughs are installed. Although, in some situations, you may still need to consider how light and reflective surfaces could affect the sensor.

The minimal surfaces and practical design make this sensor tap ideal for installation above Hospital scrub sinks, in Medical Clinics, Laboratories, Supermarkets, Manufacturing or Industry.

Features

Low energy consumption and long life batteries allow for up to 110,000 cycles battery life
No set run time - will only activate when 'body' is detected in sensor field
Hygienic 'no-touch' operation
Automatic shut off after one minute if sensor becomes obstructed
Wall Mounted Sensor Plate
Magnetic stainless steel sensor plate cover
1-2 Second time delay to eliminate false activation
Slim spout design with minimal surfaces
6 Star WELS rating
AS/NZS 3718
WaterMark

Technical Parameters

Water Pressure 100kPa - 500kPa
Single feed water supply
Recessed solenoid box - minimum cavity depth of 90mm required
Easy access to all parts through stainless steel sensor face plate for maintenance
Water temperature 1-50ºC
Power supply DC6V (4xAA Batteries), or mains with battery supply back up.
Power consumption static ≤ 0.5W (DC), ≤ 3W (AC); standby 0.003W
Water inlet G ½"
Detection zone 300-600mm (adjustable)
Respond time 1-2 Seconds
Single feed water supply
IP54